- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| MOQ: | |
|---|---|
| Delivery time: | |
| Payment method: | |
| Warranty: | |
| Quantity: | |
◆ Describe
Series: Series K3VG
Brand: fucheng
Place of Origin: Jinan, China
- Continuous pressure rating of 4600 psi (320 bar),3625 psi (250 bar) for K3VL60.
- High overall efficiency (> 90% peak)
- Exceptional self priming capabilities.
- American (SAE) or European (ISO) mounting and shaft
- Excellent reliability and very long service life.
- High power to weight ratio.
- Numerous control options.
- Variety of optional through drives.
- Quick control response.
- Low pulsation and noise levels.
- Integral unloading valve or proportional pressure relief valve available
◆ Model Code
◆ Parameter
*1 The instant allowable surge pressure as defined by DIN24312. Life and durability of the pump will be affected.
*2 Steady state inlet pressure should be greater than or equal to 0 psi (0 bar) gauge.
*3 Steady state inlet pressure should be greater than or equal to 4.5 psi (0.3 bar) gauge. However the maximum charge pressure should not exceed 145 psi (10 bar).
*4 At viscosities from 930 to 4650 SUS (200 to 1000 cSt), warm up at no load is required.
*5 ISO mounting and shaft also available. Contact Kawasaki for further information.
*6 SAE E through drive uses the SAE D shaft
◆ Dimensions
◆ Download
◆ Describe
Series: Series K3VG
Brand: fucheng
Place of Origin: Jinan, China
- Continuous pressure rating of 4600 psi (320 bar),3625 psi (250 bar) for K3VL60.
- High overall efficiency (> 90% peak)
- Exceptional self priming capabilities.
- American (SAE) or European (ISO) mounting and shaft
- Excellent reliability and very long service life.
- High power to weight ratio.
- Numerous control options.
- Variety of optional through drives.
- Quick control response.
- Low pulsation and noise levels.
- Integral unloading valve or proportional pressure relief valve available
◆ Model Code
◆ Parameter
*1 The instant allowable surge pressure as defined by DIN24312. Life and durability of the pump will be affected.
*2 Steady state inlet pressure should be greater than or equal to 0 psi (0 bar) gauge.
*3 Steady state inlet pressure should be greater than or equal to 4.5 psi (0.3 bar) gauge. However the maximum charge pressure should not exceed 145 psi (10 bar).
*4 At viscosities from 930 to 4650 SUS (200 to 1000 cSt), warm up at no load is required.
*5 ISO mounting and shaft also available. Contact Kawasaki for further information.
*6 SAE E through drive uses the SAE D shaft
◆ Dimensions
◆ Download
